Wall Mounts
No more exposed screw heads or ugly nails! Our stylish wall mounts will add a beautiful, premium finish to your wall planners, house number signs or custom signs! They are quick and easy to install and super simple to swap over at a later date, if you decided to change your sign or mounts colour!
Size (WxL): Small (12x25mm), Large (19x25mm)
Material: Stainless Steel
Wall Anchor Type: Plasterboard, Brick/Concrete
Sign Hole Size: 8mm (Small), 10mm (Large)
Gap Between Wall & Sign: 20mmColours: Matt Black, Matt White, Brushed Silver, Brushed Gold
- Each mount includes 1x screw & 1x wall anchor
- Each Mount Sold Separately
This product is suitable for indoor & outdoor use
PLASTERBOARD
Place your sign against the wall and mark the centre of each hole. Screw the wall anchor into the wall. Pre-drilling is not required.
Separate your wall mounts and fix the barrel into the wall anchors using the provided screws. Thread the cap through the holes in your sign, with a washer on either side of your sign.
Place your sign with the caps inserted into the barrels and turn to fasten mounts.
BRICK/CONCRETE
Place your sign against the wall and mark the centre of each hole. Using a 7mm drill bit, drill sufficent depth to allow the wall anchors to sit flush inside the wall. Use a hammer to insert the wall anchors into the wall.
Separate your wall mounts and fix the barrel into the wall anchors using the provided screws. Thread the cap through the holes in your sign, with a washer on either side of your sign.
Place your sign with the caps inserted into the barrels and turn to fasten mounts.
